Advantages of using electric heating cable for self-melting ice and snow roofing

Published on:

2023-01-03 13:47

In the north of my country, snowfall in winter is a common natural phenomenon, snow melts and freezes, which causes corrosion of buildings. Therefore, only by studying the snow and its adverse effects on the roofs and skylights of buildings and taking measures to eliminate these adverse effects can the safety and normal use of the building roof itself be guaranteed.

Construction Machinery Icing Hazard

1. The danger of snow accumulation: when the accumulation of snow reaches a certain thickness, it can lead to blindness of the building, and in severe cases-to damage to the building structure, there is a danger of crushing, dust, coal particles, minerals, etc. D. The snow will destroy the components of the building to a certain extent, pollute the appearance of the building and reduce the life of the components; the "second snowfall" will increase the cost of replacement, easily damage people's eyes and interfere with normal life.

Therefore, the accumulation of snow on the roofs of buildings is to a certain extent harmful In addition to preventing the gravity load caused by the accumulation of snow, this case is the primary method for eliminating the dangers of snow accumulation.

2 The danger of building icing: Once an ice cone forms, it becomes an upside-down sharp sword that can damage passing pedestrians and vehicles, damage the building's appearance and effect, block people's vision, and affect the building's appearance. City; shut off the building's drainage and sewer system, causing water to accumulate on the ground or roof.

Therefore, ice melting, like snow melting, is also a factor to consider when designing building roofs.

Therefore, the accumulation of snow on the roofs of buildings is to a certain extent harmful In addition to preventing the gravitational load caused by the accumulation of snow, this case is the primary method of eliminating the dangers of snow accumulation.

2 Danger of building icing: Once an ice cone forms, it becomes an upside-down sharp sword that can damage passing pedestrians and vehicles, damage the building's appearance and effect, block people's vision, and affect the building's appearance. City; shut off the building's drainage and sewer system, causing water to accumulate on the ground or roof.

Therefore, ice melting, like snow melting, is also a factor to consider when designing building roofs.

While there are many ways to clear ice and snow, not all measures to melt ice and snow can be inherited on the roofs of buildings.

First, many technologies have limitations in conventional snow melting; second, when snow melting technology is integrated into the roofs of buildings, the physical or chemical influence of the respective properties of materials must be fully considered, and the way and process of combining the respective systems, especially in the example. In terms of saving, energy saving in operation and automation functions, more attention should be paid to comparison and research.

The electric-heated snow and ice melting system is suitable for a variety of building roofs, which can prevent snow and ice from melting and protect the front of the house and roof from ice and snow damage. Electric heating technology is economical, applicable and convenient: glass is not usually used as a decorative surface material in parts of the building that are not illuminated by daylight, so in parts such as aluminum roofs, colored steel roofs, etc. E., it does not fit. Use electric heating glasses as ice and snow melting devices, but compared to them, the cost of glass products is not low. Therefore, it is advisable to find other ways to melt ice and snow for areas of the roof that are not illuminated or where electric heating of the glass is not used. The best choice will be electric heating.

The components used in electric heating are typically electric heating cables (or heating cables) that can generate heat after power is supplied. Its biggest advantages are: low cost, water and water resistance, small dimensions, easy to install, convenient casting, easy to cut, adjustable heat dissipation, low power consumption. Most importantly, its linear shape can be easily integrated with a curtain wall or roof, which is an important factor.

Latest News

Please search according to your needs.