Annex

Product Details

1

Working principle

The tank temperature sensor sends the measured temperature to the temperature control meter in the smart temperature control box through the signal cable, and the temperature meter compares the received temperature with the specified temperature, and the current temperature is higher than the set temperature. Temperature When the current temperature is lower than the set temperature, the electric heating does not work. To avoid frequent starts, hysteresis is usually set. The junction box can also be connected to the central control room or DCS system by remote control. Communication., can remotely observe and control the start and stop of the electric heating cable. 		1

1

Construction and installation

When the electric heating cable is laid on the tank body, the surface of the tank body should be ironed out first, and then a layer of wire mesh must be laid on the tank body (or insulating nails must be glued to the tank body, Or the hooks must be welded to the tank body, etc. D.), and finally, an electric heating cable should be installed. After the heating cable is installed, cover it with a layer of aluminum foil along the direction of the electric heating cable to increase the heating area of the tank. The installation distance is obtained by calculating the heat dissipation and surface area of the tank. In Atlas 16C401.
Search

Please search according to your needs.