Apr 18,2023
How to choose electric heating devices of petrochemical industries?
虽在一次性投资方面略高于蒸汽或热水伴热,但仪表电伴热系统以其伴热精度高,生产和维护费用低,节能、环保、无腐蚀等特点,在大型石化项目中得到越来越广泛的应用。
Industry News
Apr 17,2023
Application of the method of electric heating on the skin effect in the oil pipeline
Once the skin-effect electric heating technology is promoted and applied in remote well stations, it can replace the three-pipe process, reduce energy consumption, reduce costs, obtain obvious economic benefits and raise the technical level of crude oil collection and transportation to a new stage.
Industry News
Apr 17,2023
Application of electric heating to increase the temperature of carbon dioxide
In order to ensure that the CO₂ gas is always maintained within a certain temperature range (typically 35 ~ 40 °C) during the transmission process, a more advanced electric heating device is selected to realize the transportation of CO₂ gas with heating.
Industry News
Apr 14,2023
The external instruments and measuring pipelines of nuclear power plants mainly use the following two measures of electric heating: one is traditional steam or hot water heating, the other is electric heating. This article outlines the advantages of electric heating through the analysis of steam and electric heating.
Industry News
Apr 14,2023
To ensure the normal and proper operation of the system at nuclear power plants located in the harsh cold regions of the north, it is necessary to carry out measures to isolate devices and pipelines.
Industry News
Apr 13,2023
Advantages of MI heating cable technology in industrial production
Mineral insulated heating cables have incomparably excellent performance. In a large number of application practices in China, the advantages of mineral insulated heating cable technology in the field of industrial production are summarized, that is, the technology of mineral insulated heating cables should be used to solve key cases.
Industry News
Related Posts
Electrical heating installation precautions
Electric heating cable is a heating method that uses insulation resistance or resistance heating wire to create a temperature after power supply. It can automatically adjust the output temperature and reasonably maintain the process temperature requirements to keep warm, raise the temperature and protect the heating equipment from freezing. The insulation and antifreeze effect of the container is very good.
Which electric heating should be chosen for the main pipeline transport of heavy oil
Transport of heavy oil through the pipeline over long distances and long-term retention in the pipeline will result in a drop in temperature due to heat dissipation and increased viscosity, which will cause the pipeline to be blocked by freezing or condensation-related accidents. Electric heating is widely used as effective insulation of pipelines and anti-freeze protection.
Which electric heating cable should be considered for a 4 km pipeline
According to the statistics of the Hydrometeorological Center, the average daily minimum temperature at the location of the CNPC tank farm is 5 ° C, and the average daily maximum temperature is 14 ° C. Since the freezing point of the PX is about 15 °C, the supply pipeline needs heat preservation and heating. The oil depot has been in operation for many years without a stable source of steam, therefore, this project is considering the use of electric heating technology.
Application of outdoor electric heating cable in oil main pipelines with high paraffin content
Long-distance crude oil pipelines with a high paraffin content with freezing temperatures above 50 °C. According to the requirements of the production plan of the plant, the volume of oil transportation through the pipeline is 150 thousand rubles. Tons per year, maximum-200 thousand. Tons per year.. According to the thermodynamic analysis of the pipeline, the initial supply temperature of the pipeline is 80 ° C (TN), and the temperature of the end entering the tank is 60 ° C (Tu). Since the transportation temperature needs to be adjusted according to the time of year, it sometimes needs to be transported by heat.
What heating product to choose for main infusion pipelines
In petrochemical engineering, trunk infusion pipelines are the lifeblood of the factories. The temperature in the northern region is too low in winter and the pipeline needs to be insulated to compensate for the heat loss due to the low temperature in winter to ensure the normal operation of the pipeline.
The role of leather tracer cables in the insulation of asphalt main pipelines
The toughness of the asphalt is greatly affected by the temperature. When the temperature decreases, the toughness of the asphalt increases, and the drop in resistance of the asphalt during pipeline transportation increases; when the temperature falls below the freezing point, the asphalt solidifies, causing the pipeline to clog and the conveyor belt to come to trouble. Therefore, electric heating and heat preservation during the transportation of asphalt are very important.