Providing comprehensive electric heating solutions

Apr 21,2023

How To Choose Electric Heating Cable For Cryogenic Drilling Rig

To ensure normal supply of drilling mud to the manifold in low temperatures, it is necessary to heat the track and preserve the manifold. At present, two heating methods are widely used: steam or hot water and electric heating. The application of electric heating technology in low-temperature drilling rigs can improve drilling efficiency, reduce energy consumption and reduce operating costs, which meets the current requirements of production and development in the energy saving and low-carbon economy.

Industry News


Apr 20,2023

What funds are needed for underwater oil pipelines for electric heating on the skin effect

The number of channels for electric heating on the skin effect should be determined based on the diameter and length of the particular subsea pipeline, the physical properties of the medium in the pipeline and environmental conditions. A single channel is typically used to improve reliability. Is used as a backup. What are the main components of electric heating on the skin effect?

Industry News


Apr 20,2023

50 mW CSP Project Electric Heating Selection Principles for Hami Molten Salt Tower

The Molten Salt Absorber System for the 50 MW Hami Solar Thermal Power Project is independently developed and supplied by Dongfang Boiler. Among them, the electric heating system is widely used in heat sink system equipment and pipelines. As a Dongfang Electric supplier, we have provided high quality electric heating products and successfully helped Dongfang Boiler successfully complete the construction of 50 MW solar thermal power project.

Industry News


Apr 20,2023

Heat preservation and application of heating pipe in flue gas denitrification system

The main reason for the blockage of the pipeline and the poor denitrification effect is the poor heat preservation and heating effect of the pipelines. Thus, the conversion goal can only be achieved by selecting the best heat preservation method and heating method to further improve the heat preservation and heating effect of the pipeline.

Industry News


Apr 20,2023

Application of electric heating on the skin effect in the underwater oil pipeline

Steam heating and hot water heating for underwater pipelines requires the addition of many auxiliary structures, the investment is large, the service life is short and the construction is very complex, so it is not suitable for use at sea. For electric heating with a skin effect, the effective length of the heating chain can reach 25 km, so it can be used to heat the main pipelines. Leather effect electric heating pipes have been applied in many places around the world and have achieved good results.

Industry News


Apr 18,2023

Application of Huaning Electrical Insulation System in Metro

The electric heat preservation system consists of heating cables, temperature sensors and related control systems to ensure that the ideal effect is achieved with less energy consumption. The fire pipe of this system can accurately monitor the temperature automatically and reflect the ultra-high and ultra-low temperature alarms in the built-in control room. System control alarm types: ultra-high temperature pipeline, ultra-low temperature alarm, heating cable power failure and leakage alarm.

Industry News


< 1...678...47 >

Related Posts

Electrical heating installation precautions

Electric heating cable is a heating method that uses insulation resistance or resistance heating wire to create a temperature after power supply. It can automatically adjust the output temperature and reasonably maintain the process temperature requirements to keep warm, raise the temperature and protect the heating equipment from freezing. The insulation and antifreeze effect of the container is very good.

Which electric heating should be chosen for the main pipeline transport of heavy oil

Transport of heavy oil through the pipeline over long distances and long-term retention in the pipeline will result in a drop in temperature due to heat dissipation and increased viscosity, which will cause the pipeline to be blocked by freezing or condensation-related accidents. Electric heating is widely used as effective insulation of pipelines and anti-freeze protection.

Which electric heating cable should be considered for a 4 km pipeline

According to the statistics of the Hydrometeorological Center, the average daily minimum temperature at the location of the CNPC tank farm is 5 ° C, and the average daily maximum temperature is 14 ° C. Since the freezing point of the PX is about 15 °C, the supply pipeline needs heat preservation and heating. The oil depot has been in operation for many years without a stable source of steam, therefore, this project is considering the use of electric heating technology.

Application of outdoor electric heating cable in oil main pipelines with high paraffin content

Long-distance crude oil pipelines with a high paraffin content with freezing temperatures above 50 °C. According to the requirements of the production plan of the plant, the volume of oil transportation through the pipeline is 150 thousand rubles. Tons per year, maximum-200 thousand. Tons per year.. According to the thermodynamic analysis of the pipeline, the initial supply temperature of the pipeline is 80 ° C (TN), and the temperature of the end entering the tank is 60 ° C (Tu). Since the transportation temperature needs to be adjusted according to the time of year, it sometimes needs to be transported by heat.

What heating product to choose for main infusion pipelines

In petrochemical engineering, trunk infusion pipelines are the lifeblood of the factories. The temperature in the northern region is too low in winter and the pipeline needs to be insulated to compensate for the heat loss due to the low temperature in winter to ensure the normal operation of the pipeline.

The role of leather tracer cables in the insulation of asphalt main pipelines

The toughness of the asphalt is greatly affected by the temperature. When the temperature decreases, the toughness of the asphalt increases, and the drop in resistance of the asphalt during pipeline transportation increases; when the temperature falls below the freezing point, the asphalt solidifies, causing the pipeline to clog and the conveyor belt to come to trouble. Therefore, electric heating and heat preservation during the transportation of asphalt are very important.