May 25,2023
Melamine Plant Process Pipeline Electric Heating System
The chemical company's melamine plant decided to update the valves and pipelines of the melamine reactor with a high-temperature electrical system. After more than a year of operation, the valve heaters and pipeline heat pipelines operate stably and reliably, fully meeting the needs of production and achieving the goal of technical conversion.
Industry News
May 24,2023
The use of electric heating to protect ships from freezing in cold regions
Ships must operate in cold areas, and mechanical equipment and piping passages on the open deck of the entire ship must be heated and kept warm to prevent icing.
Industry News
May 23,2023
The main use of armored heating cables with mineral insulation in photothermal power plants.
Thermal power plants must preheat pipes, fittings and equipment before their first commissioning Armored mineral insulated heating cables are the preferred heating elements for the electric heating system of solar thermal power plants.
Industry News
May 23,2023
The important role of mineral insulated armored heating cables in molten salt energy storage systems
Pipes, valves and equipment must be pre-heated before the first start of the solar thermal power plant. After the power plant heat collection system is shut down on rainy days and nights, before re-starting, the electric heating system must be started to preheat in advance or during the shutdown process Always open the electric heating system to keep warm
Industry News
May 18,2023
Gas field electric heating system
In factories in regions with severe winters, the use of electric heating is especially widespread and important. Depending on the ambient temperature, different types of electric heating can be selected to ensure the normal operation of equipment requiring electric heating systems in winter without being affected by the weather.
Industry News
May 18,2023
Selection of electric heating system type of antifreeze ventilation pipeline of the main tank
The air pipe of the ballast water tank is generally carried out of the cockpit, and during the voyage the sea water will inevitably spill out onto the deck, and due to the low temperature it is easy to freeze in the mouth of the air pipe outside the cabin. Therefore, it is especially important to formulate a reasonable system plan for freezing protection of the liquid tank ventilation pipeline.
Industry News
Related Posts
Electrical heating installation precautions
Electric heating cable is a heating method that uses insulation resistance or resistance heating wire to create a temperature after power supply. It can automatically adjust the output temperature and reasonably maintain the process temperature requirements to keep warm, raise the temperature and protect the heating equipment from freezing. The insulation and antifreeze effect of the container is very good.
Which electric heating should be chosen for the main pipeline transport of heavy oil
Transport of heavy oil through the pipeline over long distances and long-term retention in the pipeline will result in a drop in temperature due to heat dissipation and increased viscosity, which will cause the pipeline to be blocked by freezing or condensation-related accidents. Electric heating is widely used as effective insulation of pipelines and anti-freeze protection.
Which electric heating cable should be considered for a 4 km pipeline
According to the statistics of the Hydrometeorological Center, the average daily minimum temperature at the location of the CNPC tank farm is 5 ° C, and the average daily maximum temperature is 14 ° C. Since the freezing point of the PX is about 15 °C, the supply pipeline needs heat preservation and heating. The oil depot has been in operation for many years without a stable source of steam, therefore, this project is considering the use of electric heating technology.
Application of outdoor electric heating cable in oil main pipelines with high paraffin content
Long-distance crude oil pipelines with a high paraffin content with freezing temperatures above 50 °C. According to the requirements of the production plan of the plant, the volume of oil transportation through the pipeline is 150 thousand rubles. Tons per year, maximum-200 thousand. Tons per year.. According to the thermodynamic analysis of the pipeline, the initial supply temperature of the pipeline is 80 ° C (TN), and the temperature of the end entering the tank is 60 ° C (Tu). Since the transportation temperature needs to be adjusted according to the time of year, it sometimes needs to be transported by heat.
What heating product to choose for main infusion pipelines
In petrochemical engineering, trunk infusion pipelines are the lifeblood of the factories. The temperature in the northern region is too low in winter and the pipeline needs to be insulated to compensate for the heat loss due to the low temperature in winter to ensure the normal operation of the pipeline.
The role of leather tracer cables in the insulation of asphalt main pipelines
The toughness of the asphalt is greatly affected by the temperature. When the temperature decreases, the toughness of the asphalt increases, and the drop in resistance of the asphalt during pipeline transportation increases; when the temperature falls below the freezing point, the asphalt solidifies, causing the pipeline to clog and the conveyor belt to come to trouble. Therefore, electric heating and heat preservation during the transportation of asphalt are very important.