Shandong Huaning Electric Heating Technology Co., Ltd.
Considerations of thermal insulation and electric heating of external water pipes
Improving the safety standards of pipelines in buildings has led to the fact that the freezing protection systems of pipelines are playing an increasingly important role in buildings. Especially in winter in the north, the outer water pipes are often frozen and blocked. In order to ensure the normal operation of the pipeline system, electrical heat treatment.
Mar 08,2023
With the continuous growth of high-rise buildings, increasing proportion of public facilities, and increasing external equipment, the original complex pipeline system is increasingly exposed in relatively open spaces. Improving the safety standards of pipelines in buildings has led to the fact that the freezing protection systems of pipelines are playing an increasingly important role in buildings. Especially in winter in the north, the outer water pipes are often frozen and blocked. In order to ensure the normal operation of the pipeline system, electrical heat treatment.
Self-limiting temperature electric heating cable is a long belt-type heat-limiting electric heating tape, and the resistivity of its heating material has a high positive temperature (PTC) system. Evenly squeeze the semi-conductive PTC polymer composite material between the two parallel cores of the metal wire, and wrap a layer of insulating material on the outside as a sheath so that the main electric heating cable can be used and can be used if necessary. And protective layers can be added. After the electric heating cable is turned on (note that the final core should not be connected), the current flows from one core through the PTC conductive material to the other core, forming a loop. The electrical energy heats the conductive material, and its resistance immediately increases. When the temperature of the core belt rises to a certain value, the resistance reaches Chengdu, which almost blocks the current, and its temperature is no longer high. At the same time, a heating system with a lower temperature is ideal for electric heating. The power of the electric heating cable is mainly controlled by the heat transfer process, and the output power is automatically adjusted according to the temperature of the heated system.
。200m
Related Posts
Electrical heating installation precautions
Electric heating cable is a heating method that uses insulation resistance or resistance heating wire to create a temperature after power supply. It can automatically adjust the output temperature and reasonably maintain the process temperature requirements to keep warm, raise the temperature and protect the heating equipment from freezing. The insulation and antifreeze effect of the container is very good.
Which electric heating should be chosen for the main pipeline transport of heavy oil
Transport of heavy oil through the pipeline over long distances and long-term retention in the pipeline will result in a drop in temperature due to heat dissipation and increased viscosity, which will cause the pipeline to be blocked by freezing or condensation-related accidents. Electric heating is widely used as effective insulation of pipelines and anti-freeze protection.
Which electric heating cable should be considered for a 4 km pipeline
According to the statistics of the Hydrometeorological Center, the average daily minimum temperature at the location of the CNPC tank farm is 5 ° C, and the average daily maximum temperature is 14 ° C. Since the freezing point of the PX is about 15 °C, the supply pipeline needs heat preservation and heating. The oil depot has been in operation for many years without a stable source of steam, therefore, this project is considering the use of electric heating technology.
Application of outdoor electric heating cable in oil main pipelines with high paraffin content
Long-distance crude oil pipelines with a high paraffin content with freezing temperatures above 50 °C. According to the requirements of the production plan of the plant, the volume of oil transportation through the pipeline is 150 thousand rubles. Tons per year, maximum-200 thousand. Tons per year.. According to the thermodynamic analysis of the pipeline, the initial supply temperature of the pipeline is 80 ° C (TN), and the temperature of the end entering the tank is 60 ° C (Tu). Since the transportation temperature needs to be adjusted according to the time of year, it sometimes needs to be transported by heat.
What heating product to choose for main infusion pipelines
In petrochemical engineering, trunk infusion pipelines are the lifeblood of the factories. The temperature in the northern region is too low in winter and the pipeline needs to be insulated to compensate for the heat loss due to the low temperature in winter to ensure the normal operation of the pipeline.
The role of leather tracer cables in the insulation of asphalt main pipelines
The toughness of the asphalt is greatly affected by the temperature. When the temperature decreases, the toughness of the asphalt increases, and the drop in resistance of the asphalt during pipeline transportation increases; when the temperature falls below the freezing point, the asphalt solidifies, causing the pipeline to clog and the conveyor belt to come to trouble. Therefore, electric heating and heat preservation during the transportation of asphalt are very important.
Need help to find the right solution with our experts?
WhatApp:
E-mail:
Address:
Xinxing Street, Industrial Park, Shanghe County, Jinan City, Shandong Province
✪ Huaning Electric Heat Tracing provides you with professional solutions
