Providing comprehensive electric heating solutions

May 09,2023

Application of heating cable for snow melting and ice melting on the slope of the underground garage

Since the heating cable has the advantages of safety, durability, environmental protection, easy operation and convenient control, in order to improve the effect of melting snow and ice on the slope, save energy and reduce emissions, and protect the environment, the heating cable is placed in the concrete protective layer to achieve the function of melting snow and ice.

Industry News


Apr 27,2023

Technical example of heating cable for snow melting and roof icing control

Using the snow melting of the trough of the railway station in the north and the control of icing of the canopy cornices, the use of heating cables for snow melting and anti-icing of the roof of large public buildings is presented.

Industry News


Apr 27,2023

Electric heating device for melting ice and snow liquid on ascents and descents

In winter, in the northern part of my country, it is difficult for vehicles to move due to ice and snow on the road surface, especially on ascents and descents. As a method of completely removing ice and snow, the method of electric heating snow melting has abundant energy, especially in the northern regions, where ice and snow persist for a long time and the intensity is high, it still has great applicability.

Industry News


Apr 25,2023

Application of electric heating in the offshore platform gas pipeline

The offshore platform of CNOOC Bohai is to monitor the temperature of the natural gas entering the microturbine unit at around 50C. Therefore, it is necessary to design the electric heating of the gas pipeline to maintain the gas temperature at the applicable level..

Industry News


Apr 25,2023

The main problems in the field of electric heating design

As an effective solution for electric heating to compensate for heat loss through electric heat exchange, electric heating is mainly used to protect against freezing and preserve heat in pipelines (storage tanks) in the energy sector. As electric heating technology becomes more and more mature, electric heating engineering products are gradually replacing traditional steam and hot water heating products with the advantages of cleanliness, energy saving and ease of management, and have become a key national energy saving project.

Industry News


< 1...456...47 >

Related Posts

Electrical heating installation precautions

Electric heating cable is a heating method that uses insulation resistance or resistance heating wire to create a temperature after power supply. It can automatically adjust the output temperature and reasonably maintain the process temperature requirements to keep warm, raise the temperature and protect the heating equipment from freezing. The insulation and antifreeze effect of the container is very good.

Which electric heating should be chosen for the main pipeline transport of heavy oil

Transport of heavy oil through the pipeline over long distances and long-term retention in the pipeline will result in a drop in temperature due to heat dissipation and increased viscosity, which will cause the pipeline to be blocked by freezing or condensation-related accidents. Electric heating is widely used as effective insulation of pipelines and anti-freeze protection.

Which electric heating cable should be considered for a 4 km pipeline

According to the statistics of the Hydrometeorological Center, the average daily minimum temperature at the location of the CNPC tank farm is 5 ° C, and the average daily maximum temperature is 14 ° C. Since the freezing point of the PX is about 15 °C, the supply pipeline needs heat preservation and heating. The oil depot has been in operation for many years without a stable source of steam, therefore, this project is considering the use of electric heating technology.

Application of outdoor electric heating cable in oil main pipelines with high paraffin content

Long-distance crude oil pipelines with a high paraffin content with freezing temperatures above 50 °C. According to the requirements of the production plan of the plant, the volume of oil transportation through the pipeline is 150 thousand rubles. Tons per year, maximum-200 thousand. Tons per year.. According to the thermodynamic analysis of the pipeline, the initial supply temperature of the pipeline is 80 ° C (TN), and the temperature of the end entering the tank is 60 ° C (Tu). Since the transportation temperature needs to be adjusted according to the time of year, it sometimes needs to be transported by heat.

What heating product to choose for main infusion pipelines

In petrochemical engineering, trunk infusion pipelines are the lifeblood of the factories. The temperature in the northern region is too low in winter and the pipeline needs to be insulated to compensate for the heat loss due to the low temperature in winter to ensure the normal operation of the pipeline.

The role of leather tracer cables in the insulation of asphalt main pipelines

The toughness of the asphalt is greatly affected by the temperature. When the temperature decreases, the toughness of the asphalt increases, and the drop in resistance of the asphalt during pipeline transportation increases; when the temperature falls below the freezing point, the asphalt solidifies, causing the pipeline to clog and the conveyor belt to come to trouble. Therefore, electric heating and heat preservation during the transportation of asphalt are very important.