Providing comprehensive electric heating solutions

Apr 01,2023

Selection of electric heating type of fire hydrant sprinkler system

Fire hydrant sprinkler system is an important fire prevention and fire extinguishing device. In engineering practice, due to improper handling of the design, construction, maintenance and other reasons, if the fire pipe is blocked or damaged by freezing, it will cause more serious damage consequences, we recommend using heating tape to solve.

Industry News


Apr 01,2023

Electric heating replaces steam heating as the main means of heat preservation for gas drishers in steel mills.

The integrated gas management station in the gas operations area has a large area, and there are a large number of gas ducts and attached upper and lower drainage pipes. With the introduction of energy-saving steam heating conversion, all steam heat preservation in the area is replaced by heat preservation electric heating, which can reduce energy consumption, reduce costs and reduce the daily maintenance burden.

Industry News


Mar 30,2023

Measures for insulation and anti-freezing of pipelines of fire water supply-electric heating and insulation

The pipeline heating system includes a power supply, a heating cable, a temperature control system, a remote control unit, external insulation and pipe identification, etc. Temperature data is displayed through the temperature control system, and these data are relatively accurate as they can ensure the use of the lowest energy consumption to achieve the goal of a good antifreeze effect.

Industry News


Mar 29,2023

Design principles of electric heating and thermal insulation of the metro

The normal operation of the subway is inseparable from the safety of the fire pipeline. In the cold winter, the fire-fighting pipeline without antifreeze measures often freezes. Great hidden danger. Currently, drainage pipes and fire-fighting pipes at subway stations and tunnel entrances use electric heating to prevent freezing and keep warm.

Industry News


Mar 29,2023

Application of self-regulating electric heating cable to protect the subway line 2 of the Jinan Transit Railway from freezing.

Fire and domestic water supply pipes of ventilation shafts, entrances and exits, ends of sections and entrance and exit sections of the railway station are extremely vulnerable to freezing, while traditional constant power heating cables generate constant heat and cannot be crossed. Not suitable for shutdown, power will increase after shutdown, and there are certain shortcomings in cable burning and energy saving. After research, a self-regulating electrical insulation system was finally selected to protect subway pipelines from freezing.

Industry News


Mar 27,2023

Application of electric heating in the insulation of pipelines and antifreeze in permafrost conditions

Various heat preservation measures have been taken in the heat preservation measures of water supply projects in the highlands. Among them, electric heating is used to solve the problem of pipeline insulation. Currently, heating systems often include hot water heating systems, steam heating systems, electric heating systems, etc. D., but the most commonly used is the electric heating system.

Industry News


< 1...101112...44 >

Related Posts

Electrical heating installation precautions

Electric heating cable is a heating method that uses insulation resistance or resistance heating wire to create a temperature after power supply. It can automatically adjust the output temperature and reasonably maintain the process temperature requirements to keep warm, raise the temperature and protect the heating equipment from freezing. The insulation and antifreeze effect of the container is very good.

Which electric heating should be chosen for the main pipeline transport of heavy oil

Transport of heavy oil through the pipeline over long distances and long-term retention in the pipeline will result in a drop in temperature due to heat dissipation and increased viscosity, which will cause the pipeline to be blocked by freezing or condensation-related accidents. Electric heating is widely used as effective insulation of pipelines and anti-freeze protection.

Which electric heating cable should be considered for a 4 km pipeline

According to the statistics of the Hydrometeorological Center, the average daily minimum temperature at the location of the CNPC tank farm is 5 ° C, and the average daily maximum temperature is 14 ° C. Since the freezing point of the PX is about 15 °C, the supply pipeline needs heat preservation and heating. The oil depot has been in operation for many years without a stable source of steam, therefore, this project is considering the use of electric heating technology.

Application of outdoor electric heating cable in oil main pipelines with high paraffin content

Long-distance crude oil pipelines with a high paraffin content with freezing temperatures above 50 °C. According to the requirements of the production plan of the plant, the volume of oil transportation through the pipeline is 150 thousand rubles. Tons per year, maximum-200 thousand. Tons per year.. According to the thermodynamic analysis of the pipeline, the initial supply temperature of the pipeline is 80 ° C (TN), and the temperature of the end entering the tank is 60 ° C (Tu). Since the transportation temperature needs to be adjusted according to the time of year, it sometimes needs to be transported by heat.

What heating product to choose for main infusion pipelines

In petrochemical engineering, trunk infusion pipelines are the lifeblood of the factories. The temperature in the northern region is too low in winter and the pipeline needs to be insulated to compensate for the heat loss due to the low temperature in winter to ensure the normal operation of the pipeline.

The role of leather tracer cables in the insulation of asphalt main pipelines

The toughness of the asphalt is greatly affected by the temperature. When the temperature decreases, the toughness of the asphalt increases, and the drop in resistance of the asphalt during pipeline transportation increases; when the temperature falls below the freezing point, the asphalt solidifies, causing the pipeline to clog and the conveyor belt to come to trouble. Therefore, electric heating and heat preservation during the transportation of asphalt are very important.