Providing comprehensive electric heating solutions

Dec 12,2022

Application of MI reinforced heating cable for heating process pipeline with modified bitumen

The modified asphalt process requires a temperature of 380 °C, which leads to the use of steam heating not only in order not to achieve the heat preservation effect, but also to reduce the temperature of the modified asphalt in the pipe, causing difficulties in the flow. Modified asphalt, and it is difficult to achieve the required processing power and product yield. Reinforced coated heating cables to solve the problem of modified bitumen insulation.

Industry News


Dec 10,2022

Application of self-regulating electric heating cable in chlor-alkali pipeline

Although the one-time investment in the heating solution with the electric heating belt is high, the operation is simple, the thermal efficiency is high, the maintenance cost is low, and the labor is saved. A comprehensive comparative analysis shows that the electric heating element heater is the most economical for the insulation and heating of chlor-alkali pipelines.

Industry News


Dec 09,2022

Heating benzene pipeline: electric heating or steam heating?

The electric heating system is used for the insulation and antifreeze of industrial pipelines, which allows you to accurately maintain the process temperature and completely eliminate erosion caused by local overheating. Electric heating technology is applied to keep the heat of simple pipelines, circuits that require accurate temperature control, main pipelines, and anti-corrosion and explosion-proof power lines. It has the advantages of good performance, reliable quality and long service life.

Industry News


Dec 08,2022

Underground Electric Heating Cable Antifreeze and Heat Preservation Housing for Alpine Cement Production Line

Electric heating cable technology has the advantages of high electric heat conversion rate, saving environmentally friendly energy, advanced technology, reasonable price-performance ratio, easy installation and operation, compact design, and safe, reliable and automatic control under electricity. Its working principle is to convert the electrical energy W = UIt into thermal energy Q, and then transfer the thermal energy to the working environment of the pipeline through thermal conductivity, thermal radiation and convection.

Industry News


Dec 07,2022

Cooling tower pipeline heating solves pipeline freezing problem

Electric heating cable is a freezing protection heating product that is used to insulate liquid piping. Conventional cooling pipe in industry can use electric heating cable for insulation and anti-freezing protection.

Industry News


Dec 05,2022

Application Example of Heating Cable for Ramp Snowmelt on Coal Mine Road

On the long descent of a mountain road in a mining area, the icing phenomenon has existed for a long time. If a snow melting agent is often used, it damages the road structure and pollutes nearby soil, vegetation and other ecological environments. Therefore, it is necessary to choose a new method of melting snow and ice with long-term effect and without side effects.

Industry News


< 1...293031...44 >

Related Posts

Electrical heating installation precautions

Electric heating cable is a heating method that uses insulation resistance or resistance heating wire to create a temperature after power supply. It can automatically adjust the output temperature and reasonably maintain the process temperature requirements to keep warm, raise the temperature and protect the heating equipment from freezing. The insulation and antifreeze effect of the container is very good.

Which electric heating should be chosen for the main pipeline transport of heavy oil

Transport of heavy oil through the pipeline over long distances and long-term retention in the pipeline will result in a drop in temperature due to heat dissipation and increased viscosity, which will cause the pipeline to be blocked by freezing or condensation-related accidents. Electric heating is widely used as effective insulation of pipelines and anti-freeze protection.

Which electric heating cable should be considered for a 4 km pipeline

According to the statistics of the Hydrometeorological Center, the average daily minimum temperature at the location of the CNPC tank farm is 5 ° C, and the average daily maximum temperature is 14 ° C. Since the freezing point of the PX is about 15 °C, the supply pipeline needs heat preservation and heating. The oil depot has been in operation for many years without a stable source of steam, therefore, this project is considering the use of electric heating technology.

Application of outdoor electric heating cable in oil main pipelines with high paraffin content

Long-distance crude oil pipelines with a high paraffin content with freezing temperatures above 50 °C. According to the requirements of the production plan of the plant, the volume of oil transportation through the pipeline is 150 thousand rubles. Tons per year, maximum-200 thousand. Tons per year.. According to the thermodynamic analysis of the pipeline, the initial supply temperature of the pipeline is 80 ° C (TN), and the temperature of the end entering the tank is 60 ° C (Tu). Since the transportation temperature needs to be adjusted according to the time of year, it sometimes needs to be transported by heat.

What heating product to choose for main infusion pipelines

In petrochemical engineering, trunk infusion pipelines are the lifeblood of the factories. The temperature in the northern region is too low in winter and the pipeline needs to be insulated to compensate for the heat loss due to the low temperature in winter to ensure the normal operation of the pipeline.

The role of leather tracer cables in the insulation of asphalt main pipelines

The toughness of the asphalt is greatly affected by the temperature. When the temperature decreases, the toughness of the asphalt increases, and the drop in resistance of the asphalt during pipeline transportation increases; when the temperature falls below the freezing point, the asphalt solidifies, causing the pipeline to clog and the conveyor belt to come to trouble. Therefore, electric heating and heat preservation during the transportation of asphalt are very important.