Providing comprehensive electric heating solutions

Feb 01,2023

Discussion on the selection of electric heating type of crude oil pipeline

It is necessary to insulate and heat the oil pipeline, remove a certain amount of heat through the heat carrier, and supplement the heat loss of the heated pipeline with direct or indirect heat exchange to meet the working needs of heating, cooling or antifreeze.

Industry News


Jan 31,2023

Congratulations to Shandong Huaning Electric Heat Tracing Technology Co., Ltd. for another sales breakthrough of 100 million yuan!

In 2022, when the epidemic is raging madly, Shandong Huaning Electric Heat Tracing Technology Co., Ltd. opposes this trend, and its leading electric heating brand "Xinhua Ning" again achieved sales of more than 100 million yuan, reaching this figure for three years in a row. Break through to the target of 100 million yuan.

Company News


Jan 31,2023

How to prevent gas pipelines from freezing in Chongqing and other southwestern regions

When the temperature of natural gas transportation through the pipeline exceeds the temperature at which hydrates are formed, changes in the water and sulfur content of natural gas components, as well as changes in the environment, do not produce He Hewu and do not cause the pipeline to be blocked by ice. Based on studies on the electric heating of offshore oil pipelines, the use of electric heating technology to increase the temperature of pipelines for collecting and transporting natural gas in order to prevent the formation of hydrates in pipelines and clogging them with ice is considered.

Industry News


Jan 31,2023

Why choose electric heating for gasifier flocculant preparation station

The gasifier plays a vital role in the methanol production process, and the flocculant preparation station is the main link in the gasifier wastewater treatment, so the reliable operation of the flocculant preparation station is especially important.

Industry News


Jan 31,2023

Which electric heating to choose in the area of installation of explosive gases

Before heating operating instruments and pressure pipelines, steam heating is usually used due to the labor intensity of installation work, steam leakage when it is turned on and off. This article deals with the design issues related to the use of electric heating of the current 220 V in the area of the device with strong explosives and liquids based on the device made of cotton fiber of the chemical company in Nanjing.

Industry News


Jan 31,2023

Heating options for underwater heavy oil pipelines

Due to heat loss in the transportation of subsea pipelines, it is difficult to achieve the ideal temperature maintenance effect through simple passive insulation. Active heating is designed to compensate for the heat loss of the subsea pipeline through external heat so that a certain subsea pipeline temperature can be maintained. In real design, passive insulation technology is usually combined with active heating technology to achieve the best temperature maintenance effect.

Industry News


< 1...242526...47 >

Related Posts

Electrical heating installation precautions

Electric heating cable is a heating method that uses insulation resistance or resistance heating wire to create a temperature after power supply. It can automatically adjust the output temperature and reasonably maintain the process temperature requirements to keep warm, raise the temperature and protect the heating equipment from freezing. The insulation and antifreeze effect of the container is very good.

Which electric heating should be chosen for the main pipeline transport of heavy oil

Transport of heavy oil through the pipeline over long distances and long-term retention in the pipeline will result in a drop in temperature due to heat dissipation and increased viscosity, which will cause the pipeline to be blocked by freezing or condensation-related accidents. Electric heating is widely used as effective insulation of pipelines and anti-freeze protection.

Which electric heating cable should be considered for a 4 km pipeline

According to the statistics of the Hydrometeorological Center, the average daily minimum temperature at the location of the CNPC tank farm is 5 ° C, and the average daily maximum temperature is 14 ° C. Since the freezing point of the PX is about 15 °C, the supply pipeline needs heat preservation and heating. The oil depot has been in operation for many years without a stable source of steam, therefore, this project is considering the use of electric heating technology.

Application of outdoor electric heating cable in oil main pipelines with high paraffin content

Long-distance crude oil pipelines with a high paraffin content with freezing temperatures above 50 °C. According to the requirements of the production plan of the plant, the volume of oil transportation through the pipeline is 150 thousand rubles. Tons per year, maximum-200 thousand. Tons per year.. According to the thermodynamic analysis of the pipeline, the initial supply temperature of the pipeline is 80 ° C (TN), and the temperature of the end entering the tank is 60 ° C (Tu). Since the transportation temperature needs to be adjusted according to the time of year, it sometimes needs to be transported by heat.

What heating product to choose for main infusion pipelines

In petrochemical engineering, trunk infusion pipelines are the lifeblood of the factories. The temperature in the northern region is too low in winter and the pipeline needs to be insulated to compensate for the heat loss due to the low temperature in winter to ensure the normal operation of the pipeline.

The role of leather tracer cables in the insulation of asphalt main pipelines

The toughness of the asphalt is greatly affected by the temperature. When the temperature decreases, the toughness of the asphalt increases, and the drop in resistance of the asphalt during pipeline transportation increases; when the temperature falls below the freezing point, the asphalt solidifies, causing the pipeline to clog and the conveyor belt to come to trouble. Therefore, electric heating and heat preservation during the transportation of asphalt are very important.