Shandong Huaning Electric Heating Technology Co., Ltd.
How to control the cost of using electric heating cable
With the development of technology, more and more heating appliances are emerging, and the new electric heating cable is gradually replacing the traditional steam heating method that people prefer. However, the cost of this electric heating method is low, and today the electric heating manufacturer will tell you how to reduce the cost.
Jul 10,2019
With the development of technology, more and more heating appliances are emerging, and the new electric heating cable is gradually replacing the traditional steam heating method preferred by people. However, the cost of this electric heating method is low, and today the electric heating manufacturer will tell you how to reduce the cost.
As for how to control the cost of electric heating cables, the electric heating cable manufacturer will introduce you to the classification of electric heating cables first. Due to the different classifications, their cost is also different. Under normal conditions, we use self-limiting and constant power electric heating cables. These two types require more funds at an early stage of use. Most people only see the cost at this time, but ignore it. The costs are not high. Types with self-limiting temperature include base type, anti-corrosion type, explosion-proof type, anti-corrosion and explosion-proof type, etc. D. Due to different conditions of use, prices also vary. In the usual environment, there are no special requirements, such as anti-corrosion or explosion-proof, etc. E., we can use the base type, so the cost is relatively low. Compared with the self-limiting temperature type, the cost of the constant power type is higher, and you can choose it according to your situation.
Based on the above points of view, if there are no special requirements, then in order to save costs, it is enough to choose a self-limiting ordinary electric heating cable.
PREVIOUS:
NEXT:
Related Posts
Electrical heating installation precautions
Electric heating cable is a heating method that uses insulation resistance or resistance heating wire to create a temperature after power supply. It can automatically adjust the output temperature and reasonably maintain the process temperature requirements to keep warm, raise the temperature and protect the heating equipment from freezing. The insulation and antifreeze effect of the container is very good.
Which electric heating should be chosen for the main pipeline transport of heavy oil
Transport of heavy oil through the pipeline over long distances and long-term retention in the pipeline will result in a drop in temperature due to heat dissipation and increased viscosity, which will cause the pipeline to be blocked by freezing or condensation-related accidents. Electric heating is widely used as effective insulation of pipelines and anti-freeze protection.
Which electric heating cable should be considered for a 4 km pipeline
According to the statistics of the Hydrometeorological Center, the average daily minimum temperature at the location of the CNPC tank farm is 5 ° C, and the average daily maximum temperature is 14 ° C. Since the freezing point of the PX is about 15 °C, the supply pipeline needs heat preservation and heating. The oil depot has been in operation for many years without a stable source of steam, therefore, this project is considering the use of electric heating technology.
Application of outdoor electric heating cable in oil main pipelines with high paraffin content
Long-distance crude oil pipelines with a high paraffin content with freezing temperatures above 50 °C. According to the requirements of the production plan of the plant, the volume of oil transportation through the pipeline is 150 thousand rubles. Tons per year, maximum-200 thousand. Tons per year.. According to the thermodynamic analysis of the pipeline, the initial supply temperature of the pipeline is 80 ° C (TN), and the temperature of the end entering the tank is 60 ° C (Tu). Since the transportation temperature needs to be adjusted according to the time of year, it sometimes needs to be transported by heat.
What heating product to choose for main infusion pipelines
In petrochemical engineering, trunk infusion pipelines are the lifeblood of the factories. The temperature in the northern region is too low in winter and the pipeline needs to be insulated to compensate for the heat loss due to the low temperature in winter to ensure the normal operation of the pipeline.
The role of leather tracer cables in the insulation of asphalt main pipelines
The toughness of the asphalt is greatly affected by the temperature. When the temperature decreases, the toughness of the asphalt increases, and the drop in resistance of the asphalt during pipeline transportation increases; when the temperature falls below the freezing point, the asphalt solidifies, causing the pipeline to clog and the conveyor belt to come to trouble. Therefore, electric heating and heat preservation during the transportation of asphalt are very important.
Need help to find the right solution with our experts?
WhatApp:
E-mail:
Address:
Xinxing Street, Industrial Park, Shanghe County, Jinan City, Shandong Province
✪ Huaning Electric Heat Tracing provides you with professional solutions
