Antifreeze for subway pipelines and fire protection-TXLP heating cable electric heating technology
The non-freezing of pipelines in winter in the northern region has always been a serious problem for builders. The Shandong Huanning Electric Heating System, used in the Shijiazhuang Line 4 Station Water Pipe Freezing Protection Project, has solved this problem well and provided a good way to completely solve such problems.
Sep 08,2022
The non-freezing of pipelines in winter in the northern region has always been a serious problem for builders. The Shandong Huanning Electric Heating System, used in the Shijiazhuang Line 4 Station Water Pipe Freezing Protection Project, has solved this problem well and provided a good way to completely solve such problems.

The purpose of pipeline insulation and antifreeze is to compensate for the heat loss caused by the temperature difference inside and outside the pipeline shell. To achieve the purpose of protecting the pipeline from freezing and preserving heat, it is only necessary to provide the heat lost by the pipeline and maintain the heat balance of the fluid in the pipeline to keep the temperature of the device basically unchanged. The insulation system of the heating cable pipes is designed to ensure the heat loss of the pipeline, and the temperature of the supporting device is basically unchanged.
Antifreeze electric heating pipeline project, that is, low temperature heating cable heating system, heating system using electrical energy directly converted to thermal energy. The electric heating system of pipelines consists of three parts: a heating cable power system, a pipeline heating system with a non-freezing cable, and an intelligent control and alarm system for the pipeline's electric heating. The heating cable unit includes a thermostat, a temperature sensor, an air switch, and a decoupling AC limit overpass alarm. Chains such as the heating cable disconnect sensor, the working state display, the sound fault signal, and the transformer are used to monitor, ventilate and adjust the working state of the electric heating.
In working condition, the temperature sensor is placed on the heated pipeline, and its temperature can be measured at any time. The thermostat detects the set temperature, compares it to the temperature measured by the temperature sensor, isolates the transmission through the air switch in the control unit of the heating cable and the alarm over the AC limit, and shuts off the power supply in time with Jiatong to achieve the purpose of heating and antifreeze.

Based on a comprehensive review of the actual engineering situation and the efficiency of the pipeline system, Shijiazhuang Metro Line 4 selected our TXLP series two core heating cable. It has a long service life of heating material. Metal protective shell can eliminate magnetic field, harmless to human body, metal waterproof shell 100% prevents water leakage, etc. D., And also has a metal reinforced shell with high tensile and compression strength.
Using heating cables to provide heat, the success of pipe insulation and anti-freezing has the following advantages:
Safe, reliable and responsive.
Uniform temperature, economy and energy saving.
It is easy to install and does not require maintenance.
Environmental protection, intelligent alarm.
Related Posts
Electrical heating installation precautions
Electric heating cable is a heating method that uses insulation resistance or resistance heating wire to create a temperature after power supply. It can automatically adjust the output temperature and reasonably maintain the process temperature requirements to keep warm, raise the temperature and protect the heating equipment from freezing. The insulation and antifreeze effect of the container is very good.
Which electric heating should be chosen for the main pipeline transport of heavy oil
Transport of heavy oil through the pipeline over long distances and long-term retention in the pipeline will result in a drop in temperature due to heat dissipation and increased viscosity, which will cause the pipeline to be blocked by freezing or condensation-related accidents. Electric heating is widely used as effective insulation of pipelines and anti-freeze protection.
Which electric heating cable should be considered for a 4 km pipeline
According to the statistics of the Hydrometeorological Center, the average daily minimum temperature at the location of the CNPC tank farm is 5 ° C, and the average daily maximum temperature is 14 ° C. Since the freezing point of the PX is about 15 °C, the supply pipeline needs heat preservation and heating. The oil depot has been in operation for many years without a stable source of steam, therefore, this project is considering the use of electric heating technology.
Application of outdoor electric heating cable in oil main pipelines with high paraffin content
Long-distance crude oil pipelines with a high paraffin content with freezing temperatures above 50 °C. According to the requirements of the production plan of the plant, the volume of oil transportation through the pipeline is 150 thousand rubles. Tons per year, maximum-200 thousand. Tons per year.. According to the thermodynamic analysis of the pipeline, the initial supply temperature of the pipeline is 80 ° C (TN), and the temperature of the end entering the tank is 60 ° C (Tu). Since the transportation temperature needs to be adjusted according to the time of year, it sometimes needs to be transported by heat.
What heating product to choose for main infusion pipelines
In petrochemical engineering, trunk infusion pipelines are the lifeblood of the factories. The temperature in the northern region is too low in winter and the pipeline needs to be insulated to compensate for the heat loss due to the low temperature in winter to ensure the normal operation of the pipeline.
The role of leather tracer cables in the insulation of asphalt main pipelines
The toughness of the asphalt is greatly affected by the temperature. When the temperature decreases, the toughness of the asphalt increases, and the drop in resistance of the asphalt during pipeline transportation increases; when the temperature falls below the freezing point, the asphalt solidifies, causing the pipeline to clog and the conveyor belt to come to trouble. Therefore, electric heating and heat preservation during the transportation of asphalt are very important.