Shandong Huaning Electric Heating Technology Co., Ltd.
Technical conditions for the use of electric heating
Electric heating is a very useful heat preservation measure that is widely used in industry, and its status is gradually increasing. Electric heating manufacturers remind you that care must be taken when installing electric heating to avoid accidents. Below I will briefly talk about some points that need to be paid attention to when installing electric heating.
Jul 10,2019
Electric heating is a very useful heat preservation measure that is widely used in industry, and its status is gradually increasing. Electric heating manufacturers remind you that care must be taken when installing electric heating to avoid accidents. Below I will briefly talk about some points that need to be paid attention to when installing electric heating.
When installed, the heating cable should be close to the surface of the pipe and fixed with an aluminum foil tape, which allows not only to expand the heat dissipation surface, but also to facilitate installation. When laying the insulation layer, we must ensure that the insulation layer is dry, because the wet insulation layer not only affects the impact efficiency, but also can cause corrosion of the electric heating cable, which is not worth the candle. And after laying the insulating material on its surface, a waterproofing layer should also be wound to ensure the normal operation of the heating system. We must install the heating cable according to the requirements and not exceed the "maximum allowable length of use".
Although electric heating is easy to use, if it is not carefully installed and not used according to the standard, luck will turn out to be miserable.
PREVIOUS:
NEXT:
Related Posts
Electrical heating installation precautions
Electric heating cable is a heating method that uses insulation resistance or resistance heating wire to create a temperature after power supply. It can automatically adjust the output temperature and reasonably maintain the process temperature requirements to keep warm, raise the temperature and protect the heating equipment from freezing. The insulation and antifreeze effect of the container is very good.
Which electric heating should be chosen for the main pipeline transport of heavy oil
Transport of heavy oil through the pipeline over long distances and long-term retention in the pipeline will result in a drop in temperature due to heat dissipation and increased viscosity, which will cause the pipeline to be blocked by freezing or condensation-related accidents. Electric heating is widely used as effective insulation of pipelines and anti-freeze protection.
Which electric heating cable should be considered for a 4 km pipeline
According to the statistics of the Hydrometeorological Center, the average daily minimum temperature at the location of the CNPC tank farm is 5 ° C, and the average daily maximum temperature is 14 ° C. Since the freezing point of the PX is about 15 °C, the supply pipeline needs heat preservation and heating. The oil depot has been in operation for many years without a stable source of steam, therefore, this project is considering the use of electric heating technology.
Application of outdoor electric heating cable in oil main pipelines with high paraffin content
Long-distance crude oil pipelines with a high paraffin content with freezing temperatures above 50 °C. According to the requirements of the production plan of the plant, the volume of oil transportation through the pipeline is 150 thousand rubles. Tons per year, maximum-200 thousand. Tons per year.. According to the thermodynamic analysis of the pipeline, the initial supply temperature of the pipeline is 80 ° C (TN), and the temperature of the end entering the tank is 60 ° C (Tu). Since the transportation temperature needs to be adjusted according to the time of year, it sometimes needs to be transported by heat.
What heating product to choose for main infusion pipelines
In petrochemical engineering, trunk infusion pipelines are the lifeblood of the factories. The temperature in the northern region is too low in winter and the pipeline needs to be insulated to compensate for the heat loss due to the low temperature in winter to ensure the normal operation of the pipeline.
The role of leather tracer cables in the insulation of asphalt main pipelines
The toughness of the asphalt is greatly affected by the temperature. When the temperature decreases, the toughness of the asphalt increases, and the drop in resistance of the asphalt during pipeline transportation increases; when the temperature falls below the freezing point, the asphalt solidifies, causing the pipeline to clog and the conveyor belt to come to trouble. Therefore, electric heating and heat preservation during the transportation of asphalt are very important.
Need help to find the right solution with our experts?
WhatApp:
E-mail:
Address:
Xinxing Street, Industrial Park, Shanghe County, Jinan City, Shandong Province
✪ Huaning Electric Heat Tracing provides you with professional solutions
