Working specifications for the use of electric heating!

Published on:

2019-07-10 15:38

Electric heating is a very useful heat preservation measure that is widely used in industry, and its status is gradually increasing. Electric heating manufacturers remind you that care must be taken when installing electric heating to avoid accidents. Below I will briefly talk about some points that need to be paid attention to when installing electric heating.

使用电伴热的工作规范

When installed, the heating cable should be close to the surface of the pipe and fixed with an aluminum foil tape, which allows not only to expand the heat dissipation surface, but also to facilitate installation. When laying the insulation layer, we must ensure that the insulation layer is dry, because the wet insulation layer not only affects the impact efficiency, but also can cause corrosion of the electric heating cable, which is not worth the candle. And after laying the insulating material on its surface, a waterproofing layer should also be wound to ensure the normal operation of the heating system. We must install the heating cable according to the requirements and not exceed the "maximum allowable length of use".

Although electric heating is easy to use, if it is not carefully installed and not used according to the standard, luck will turn out to be miserable.

Previous Article

Next Article

Previous Article

Next Article

Latest News

Please search according to your needs.