Mineral Insulated Heating Cable_Shandong Huaning Electric Heating Technology Co., Ltd

Petrochemical: benzene, styrene , phthalaldehyde , oxalic acid , propylene glycol , acrylic acid , chlorine , nylon, synthetic fiber , resin and other process pipelines and containers;

Refining: crude oil pipeline;

Wax, asphalt, heavy oil , residual oil , distillation , chlorination cracking, sulfur, coking and other pipelines ;Gas pipeline room condensation;

Catalyst gasification reactor preheating;

Liquefied petroleum gas and natural gas storage tanks are frost-proof.

Electricity: high pressure feed water, high pressure condensation , sewage venting , steam, instrumentation , acid and alkali and heavy oil ignition oil circuits , nuclear power plant reactor equipment and spiral heaters.

Metallurgy: high temperature pipeline, boiler front pipeline engineering.

Pharmaceutical:grease, hose, oil cream.

Scan the QR code to read on your phone

We could not find any corresponding parameters, please add them to the properties table

Mineral Insulated Ead Calle is made up of a metal core (heating element), a tightly surrounding mineral magnesium oxide (insulating layer) around the core, and a metal tube that has been drawn many times (usually copper, Steel or stainless steel, 825 alloy, 316L, etc. If necessary, a layer of anti-corrosion polyfluoroethylene propylene outer sheath may be extruded outside the metal sheath.

Mineral insulated heating cables are suitable for anti-freezing and heating and heating of process media in industrial or construction applications. Especially for pipelines that require high output power or need to withstand high-temperature steam purge and long-term operation at high temperature, MISS mineral insulated heating cables can show excellent characteristics in environments where corrosion protection is required.

Rated voltage	specification Sheath outer diameter(㎜)	Maximum length of use(m）	Dielectric strength	Maximum power per meter(W/m）
Rated voltage	specification Sheath outer diameter(㎜)	Lmax	VAC	Pmax
AC220V Single core	5.8	23	1200VAC/1min	340
	5.6	26	1200VAC/1min	200
	5	60	1200VAC/1min	120
	4.2	100	1200VAC/1min	60
	3.9	160	1200VAC/1min	20
AC220V Double core	6	10	1200VAC/1min	300
	5.5	30	1200VAC/1min	150
	5.2	40	1200VAC/1min	100
	5	60	1200VAC/1min	50
	4.6	120	1200VAC/1min	20
AC380V Single core	5.8	30	1200VAC/1min	300
	5.5	35	1200VAC/1min	200
	5	90	1200VAC/1min	100
	4.7	150	1200VAC/1min	50
	4.2	200	1200VAC/1min	20
AC380V Double core	6	15	1200VAC/1min	300
	5.8	40	1200VAC/1min	200
	5.5	70	1200VAC/1min	100
	5.2	100	1200VAC/1min	50
	4.7	180	1200VAC/1min	20

1 Because the heating cable is composed of non-combustible inorganic materials, the product is fireproof, flame retardant, does not release toxic gases, and has zero combustion.

2 The temperature limit of the heating cable itself is the highest temperature that the core and metal sheath layers are formed.

3 The insulating layer is magnesium oxide, the core and the sheath are made of metal, which fundamentally solves the aging problem and maximizes the service life of the cable.

4 products with different outer casing can withstand the erosion of oils, solvents and most acids. Has good chemical stability.

5 metal sheath has excellent explosion-proof performance and electromagnetic shielding performance, and can also be used as a ground loop.

6Good mechanical properties, due to its solid structure, it can withstand twisting, extrusion, bending, pulling, friction and general heavy handling.

7 series resistance type electric heating element is adopted, so the heat is uniform, the total length difference is extremely small, and the heating power is large, generally between 20 and 200 W/m.

8 Mineral insulated heating cables are prohibited from being used for crossover and overlap during installation. The MI cold end joints are prohibited from bending, and the cold end and junction box should be placed outside the insulation layer.

Product Center

Mineral Insulated Heating Cable

Mineral Insulated Heating Cable

Online Message